2nd CAMM Mod Night of 2010

carchitect wrote:

More likely a tension short of getting a look at it. But Adam iirc is a professional wrench.

ghost wrote:

how about a shitty end link. i know my front drivers said is toast. i have kind of the same symptoms.

Sway bar bushing can be a culprit too

I guess it will be trial and error then! Hopefully Adam can make it.

Shawn1112 wrote:

Illinois Chaos wrote:

I'm there. Put me down. Maybe I can get my stuff from Razors edge by then. Only been since March 15 lol. they suck!

I have a feeling you will be busy taking people for a ride all day long!

Yeah beer and pizza runs, stopping off at the parts store on the way, lol.

not too far from me would like 2 come by to see others grill lights.. wants to get those and halos in the next month or 2

also the "home" address is still in the gps, the guy who owned my srt8 lives in streamwood maybe ill go by and say hi! I think the dealer made a mistake and also gave me his name cuz he also took it to schaumburg dodge.

Anyone know Michael Sak in Streamwood?

Never heard of him

Sak... hee hee hee.

Added.

sak9880 our member is Mike Sak but he lives in Marengo. Probably not the same one.

Name sounds familiar. Isn't he the guy that killed himself in his car?

I'm really beginning to worry about you now Eric

Now you are worried about him. NOW!!!??!!!

HiPwr wrote:

Name sounds familiar. Isn't he the guy that killed himself in his car?

hahahahahahahaha

I'm down..

Nothing for me this time..

Just bringing myself to hang out and see you guys twice in the same week..

Gonna miss this one. Ethan's 1st communion takes precedence.

i will see if i can make it up there.

I installed my Razors Edge brace for Vortech in my garage earlier in the week. I installed my subframe braces today on a lift at my buddies farm. After beating the shit out of it with big hammers I was able to tack it into place and stitch on some welds and not start the carpet on fire. Always a plus! It's an awesome mod. Now my front frame is tied in to my rear frame. What a difference in handleing. I'm still waiting for my adj. endlinks and RE bumpsteer cor kit. I think the front sway can be done off of a jack stand. The bumpsteer too, maybe. Can the cradle get dropped off of just a jack stand at mod night? Or should I just do it all off of a lift?

is this a camm club event or can anybody come?

ghost wrote:

is this a camm club event or can anybody come?

As far as I know, anyone can come!!!!

It's for CAMM and CAMM affiliates (there's a couple of them around).

ok good, i was going to invite a camaro club to join us

Camaro clubs are fine as long as they drive Mopars.

Illinois Chaos wrote:

I installed my Razors Edge brace for Vortech in my garage earlier in the week. I installed my subframe braces today on a lift at my buddies farm. After beating the shit out of it with big hammers I was able to tack it into place and stitch on some welds and not start the carpet on fire. Always a plus! It's an awesome mod. Now my front frame is tied in to my rear frame. What a difference in handleing. I'm still waiting for my adj. endlinks and RE bumpsteer cor kit. I think the front sway can be done off of a jack stand. The bumpsteer too, maybe. Can the cradle get dropped off of just a jack stand at mod night? Or should I just do it all off of a lift?

I hear very bad things about the bump steer stuff from razors edge. I hear they strip and fall apart VERY easily and some vendors have stopped selling them for that reason. Just trying to give you a heads up. They might of fixed the problem though but Im not sure.

I heard the same thing, so just give that garbage to me. I will put it to good use. lol

Shawn1112 wrote:

I heard the same thing, so just give that garbage to me. I will put it to good use. lol

Lol. I heard one guy had his fall apart while he was installing them. I dont know if he messed up the install or not but I wouldnt chance it on my ride.

liljoejoe54 wrote:

Shawn1112 wrote:

I heard the same thing, so just give that garbage to me. I will put it to good use. lol

Lol. I heard one guy had his fall apart while he was installing them. I dont know if he messed up the install or not but I wouldnt chance it on my ride.

Paul called me and said they were having some problems. He was sending out some of the damage returns to a metalurgist to get stress and rockwell hardness tests done. He seemed to think that all tests would come back positive. It could just be inexperienced people threading on the cap nuts and cross threading them. I will be getting the adj. endlinks and bs cor kit this next week. Should I do this shit on the lift or can sways be put on at Shawns?

I think a lift is easier, ask Jontoad.

Shawn1112 wrote:

I think a lift is easier, ask Jontoad.

Yeah, I think a lift is better.