Stack Performance Chubby Sways and REM adj. End Links/fr

Well I sweated a pile today, but I got my front sways done and end links
old end link out



REM adj. end link on







Chubby sway

side by side comparison

one side on measured at 8" same as stock link


it's on time to go have a beer


It should be awesome!

good stuff. did you find a buyer for your old parts?

Damn thats bad ass tom... that car is going to literally be on rails...

pending, but first come first served.

irishrt5.7 wrote:

Damn thats bad ass tom... that car is going to literally be on rails...

Exactly my thoughts, Brian. lol

Congrats Tom, im glad you FINALLY got your end links! How is the quality of the links?

liljoejoe54 wrote:

Congrats Tom, im glad you FINALLY got your end links! How is the quality of the links?

These were the fronts. I've had these. It's the rears I am waiting for. I can do those anytime. I have the rear sway on anyway and the oem endlink is fine. I was just out to do a test drive and it's like a gokart. I'm feeling a little vibration in the drive train and it wanders a little to the right now. Plus i heard something fall off and go tink tink tink as it bounced out the rear. I don't know if I left a wrench up there or if it was a badge I dropped into the back of the motor awhile ago or what. lol.

Illinois Chaos wrote:

liljoejoe54 wrote:

Congrats Tom, im glad you FINALLY got your end links! How is the quality of the links?

These were the fronts. I've had these. It's the rears I am waiting for. I can do those anytime. I have the rear sway on anyway and the oem endlink is fine. I was just out to do a test drive and it's like a gokart. I'm feeling a little vibration in the drive train and it wanders a little to the right now. Plus i heard something fall off and go tink tink tink as it bounced out the rear. I don't know if I left a wrench up there or if it was a badge I dropped into the back of the motor awhile ago or what. lol.

Lol hopefully it was just that badge.

Yeah, everything was all good until today. I'll have to look around under there and retighten stuf and see if a bolt or something is gone. It kinda feels like it's in the drive line. I'll remeasure those endlinks too, for the pulling to the right. It could just be the road crown and bumpsteer is magnified or something. I've got the REM bump steer correction kit, but I'm not going to do that because of alignment and I don't want to just guess at it.

lookin good under there! congrats

RT!st!C wrote:

lookin good under there! congrats

under where? Ha get it? OK im done.

I swear Joey. You should do standup comedy, Mr. Dickfor.

Illinois Chaos wrote:

I swear Joey. You should do standup comedy, Mr. Dickfor.

you seeeeeee joey! do it!..........do it!

liljoejoe54 wrote:

RT!st!C wrote:

lookin good under there! congrats

under where? Ha get it? OK im done.

looks nice! the rear is the most important link (hence why pedders only sells upgraded rear links) so it should feel even more go kart like when you get those rear links in.

how did you like those front link bolts? lol. mine were a pain in the ass causing me to brake 2 sockets on them. maybe yours were easier since your car is like 2-3 years newer than mine.

jontoad wrote:

looks nice! the rear is the most important link (hence why pedders only sells upgraded rear links) so it should feel even more go kart like when you get those rear links in.

how did you like those front link bolts? lol. mine were a pain in the ass causing me to brake 2 sockets on them. maybe yours were easier since your car is like 2-3 years newer than mine.

Are you talking about the top or the bottom bolts? Mine werent that hard, I just needed a vice grip to hold the bolt from spinning. That was the bottom one though, I havent tried the top but I guess I will when I get my BWoody's next summer.

joey did you use an impact? an impact would have got it no problem with the vise grip. i only had a breaker bar in my driveway so the vise grip didn't do much till you got the whole thing to spin free. but yes i used the vise grip on the bottom once i got it to move.

jontoad wrote:

joey did you use an impact? an impact would have got it no problem with the vise grip. i only had a breaker bar in my driveway so the vise grip didn't do much till you got the whole thing to spin free. but yes i used the vise grip on the bottom once i got it to move.

Yeah i used an impact. I tried it with a wrench but it wouldnt budge.

jontoad wrote:

looks nice! the rear is the most important link (hence why pedders only sells upgraded rear links) so it should feel even more go kart like when you get those rear links in.

how did you like those front link bolts? lol. mine were a pain in the ass causing me to brake 2 sockets on them. maybe yours were easier since your car is like 2-3 years newer than mine.

They were time consuming, but they came easy.

Illinois Chaos wrote:

They were time consuming, but they came easy.

That's what she said.

jontoad wrote:

Illinois Chaos wrote:

They were time consuming, but they came easy.

That's what she said.

LMFAO!!