PWR 440 half filled shortblock up to 1800HP

I called Andy today and had a long discussion with him about why I thought this should be sent to 601 W. Jefferson St. Only time will tell if it gets sent there in a crate. This is the ultimate motor. The processing of the crank alone is just unbelievable. This is a bullet proof setup.

Manley crank:
Incoming Magna Flux Inspection, Check TIR, Visual Inspection
CDM ( Controlled Displacement Micro ) Polish Prior to Nitride
Ion Nitride
CDM Polish After Nitride
Final Insp. & MPI

Manley 300m Connecting Rods:
Forged from 300 M aircraft quality material
Fully machined to produce the lightest and strongest rod possible
Shot peened after machining to Mil specs and 100% individually magnafluxed
7/16" ARP Custom Age 625+ cap screws

Manley Custom Forged 2618 Pistons:
9310 Tool Steel Wrist Pins
Total Seal Steel Rings
Reinforced/Thicker Skirts and Crowns

6.1 Iron Block:
Darton MID Sleeves Installed
Sleeves are Ductile Iron (Not Cast Iron like the Aluminum Blocks)
Half-Filled with Hard Block
Billet Caps
ARP Main Studs
ARP 1/2" Head Studs

6.1 Block: $1000
Darton Sleeves/Installed: $3500
Hard Block: $300
Billet Caps: $500
ARP Main/Head Studs: $550
Crank: $1600
Rods: $2400
Pistons: $1000
Rings/Wrist Pins: $650
Bearings: $200
Machining/Assembly: $1000
Total: $12,700

Thats a max effort engine with every possible upgrade you could consider. I would like to sell this today and its being sold outright meaning I do not need a core sent back. I will ship it within 24 hours and the shipping will be included. The first person to offer $8000 will get this.

Holy fucking jesus I need to win the lottery there u go Tom then add tt to that bitch and some nitrous and shit ur pants at the track

This about sums it up....

Its only money Tom, this is your dream to do this kinda stuff. Btw you can always have it shipped here, just cant promise youll see your parts this time!

I dunno, I would still need to add Heads $2800, Cam $450 and an intake manifold $1000.

Drooooooooooool

Illinois Chaos wrote:

I dunno, I would still need to add Heads $2800, Cam $450 and an intake manifold $1000.

yeah well when you sell yours should help for making up on some money.. hell ill take your manifold off of ya

if the price is right

The longer I think about it the more I'm thinking I should just build my seasoned short block into a forged long block. I already have the forged crank, lol. I think I could build mine for $6500 ish. Andys would be twice that.

Just get it from Andy, all you have to do is punch about 16 numbers on the computer and its yours. I will donate $1

lmao