Race Bypass Valve

Subject: Race Bypass Valve July 13th 2010, 2:49 pm

I finally found the solution to that unintended acceleration issue I was having with my blower. I just ordered a bigger bypass valve that will let out all of that unwanted boost acceleration. I'll gain more hp too Twisted Evil

Subject: Re: Race Bypass Valve July 13th 2010, 3:05 pm

Thats cool. So its pretty much like a blow out valve like on turbo chargers? Im glad you found a solution because that unintended acceleration couldof been dangerous.

_________________

As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear god protect my ride. Amen.

Subject: Re: Race Bypass Valve July 13th 2010, 3:11 pm

Exactly Joey. Some guys mod the blowoffs for sc apps. And yeah it IS dangerous. I kinda liked it at first, but when it fucking rains it ain't fun believe me!

Subject: Re: Race Bypass Valve July 13th 2010, 3:52 pm

yeah i saw these... they look good... hope if fixes the problem...

Subject: Re: Race Bypass Valve July 13th 2010, 7:46 pm

ya didnt call me silly..

Subject: Re: Race Bypass Valve July 13th 2010, 8:47 pm

Bob_Kurgan wrote:: ya didnt call me silly..

Ok I will then. SILLY!!!! neener

Subject: Re: Race Bypass Valve July 13th 2010, 11:36 pm

Bob_Kurgan wrote:: ya didnt call me silly..

Oh I wasn't implying it was anything to do with the install, Bob. Nature of the beast.

Subject: Re: Race Bypass Valve July 14th 2010, 12:10 am

LOL...... I am running an Ebay BOV on my Powerdyne......

Subject: Re: Race Bypass Valve July 14th 2010, 6:57 am

Illinois Chaos wrote:

Bob_Kurgan wrote:: ya didnt call me silly..

Oh I wasn't implying it was anything to do with the install, Bob. Nature of the beast.

nah, i meant to order it up!

Subject: Re: Race Bypass Valve July 14th 2010, 8:10 am

Bob_Kurgan wrote:

Illinois Chaos wrote:

Bob_Kurgan wrote:: ya didnt call me silly..

Oh I wasn't implying it was anything to do with the install, Bob. Nature of the beast.

nah, i meant to order it up!

My bad.

Subject: Re: Race Bypass Valve July 14th 2010, 8:15 am

Bob_Kurgan wrote:

Illinois Chaos wrote:

Bob_Kurgan wrote:: ya didnt call me silly..

Oh I wasn't implying it was anything to do with the install, Bob. Nature of the beast.

nah, i meant to order it up!

How would you have had time to do so w/ how busy you are... im just saying...

Subject: Re: Race Bypass Valve July 14th 2010, 8:19 am

irishrt5.7 wrote:

Bob_Kurgan wrote:

Illinois Chaos wrote:

Bob_Kurgan wrote:: ya didnt call me silly..

Oh I wasn't implying it was anything to do with the install, Bob. Nature of the beast.

nah, i meant to order it up!

How would you have had time to do so w/ how busy you are... im just saying...

i email all my PO's in every morning.. I also have Jake who answers the phones to take orders etc..

that's why i spend time on the boards from 6am-9am every morning and in the evening as well.. during the day is hectic with 3 tunes every day.

Subject: Re: Race Bypass Valve July 14th 2010, 11:53 am

you didn't have a bov at all before tom? or just not a nice one like that? any car running boost around 6lbs and up should have one. I would be quite shocked if the normal vortech kit didn't come with one...

_________________
Race Bypass Valve 35i5dfa

2015 Blue Streak Ram R/T w/rambox - Daily driver status
2006 Charger /SRT//8/ - Autocross spec
SRT MAX Plus cam, Dominator stall torque converter, AMG blue top shift solenoids, Wavetrack LSD, richmond 3.55 gears, Tein Superstreet coilovers, stack 'chubby'' sway bars, ect...
Autocross videos - (((((SRT8 Charger autocross lap.))))) - (((((Edited movie.))))) - (((((Helmet cam lap.)))))

Subject: Re: Race Bypass Valve July 14th 2010, 1:06 pm

jontoad wrote:: you didn't have a bov at all before tom? or just not a nice one like that? any car running boost around 6lbs and up should have one. I would be quite shocked if the normal vortech kit didn't come with one...

Yes, the one that comes with the kit was smallish. It couldn't keep up and this one is a racing bypass which is huge in comparison.

Subject: Re: Race Bypass Valve July 14th 2010, 1:14 pm

the one that comes with the kit we use on car making 700rwhp without an issue.. If the valve is too small, you will see surging at idle and at WOT where the valve can NOT escape enough air at idle (surge) or cant HOLD the valve closed (at WOT)... if neither of these issues are evident, an upgraded one will do nothing.. It does not add HP, nor does it do anything else power related.. Just an FYI from a 15yr vortech man

Subject: Re: Race Bypass Valve July 14th 2010, 1:35 pm

Bob_Kurgan wrote:: the one that comes with the kit we use on car making 700rwhp without an issue.. If the valve is too small, you will see surging at idle and at WOT where the valve can NOT escape enough air at idle (surge) or cant HOLD the valve closed (at WOT)... if neither of these issues are evident, an upgraded one will do nothing.. It does not add HP, nor does it do anything else power related.. Just an FYI from a 15yr vortech man

I was hoping to relieve the surging that occurs at partial throttle. (The Maxflow Bypass Valve improves supercharger operation by opening to relieve unwanted pressure during deceleration. Flow is rated at 320 CFM at 8 PSIG and the valve is preset to open at 4-5 inches of vacuum.) When I give it too much gas from a stop it just goes to a condition of half throttle boost and I can't stop it until it's over. I guess I misread the hp thing but when I get to the point where I want to increase boost it couldn't hurt.

Subject: Re: Race Bypass Valve July 14th 2010, 2:25 pm

Illinois Chaos wrote:

Bob_Kurgan wrote:: the one that comes with the kit we use on car making 700rwhp without an issue.. If the valve is too small, you will see surging at idle and at WOT where the valve can NOT escape enough air at idle (surge) or cant HOLD the valve closed (at WOT)... if neither of these issues are evident, an upgraded one will do nothing.. It does not add HP, nor does it do anything else power related.. Just an FYI from a 15yr vortech man

I was hoping to relieve the surging that occurs at partial throttle. (The Maxflow Bypass Valve improves supercharger operation by opening to relieve unwanted pressure during deceleration. Flow is rated at 320 CFM at 8 PSIG and the valve is preset to open at 4-5 inches of vacuum.) When I give it too much gas from a stop it just goes to a condition of half throttle boost and I can't stop it until it's over. I guess I misread the hp thing but when I get to the point where I want to increase boost it couldn't hurt.

I think the most important thing is that you will hopefully no longer have any sudden surges and be able to control your car 100% now.

_________________

As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear god protect my ride. Amen.

Subject: Re: Race Bypass Valve July 14th 2010, 9:15 pm

liljoejoe54 wrote:

Illinois Chaos wrote:

Bob_Kurgan wrote:: the one that comes with the kit we use on car making 700rwhp without an issue.. If the valve is too small, you will see surging at idle and at WOT where the valve can NOT escape enough air at idle (surge) or cant HOLD the valve closed (at WOT)... if neither of these issues are evident, an upgraded one will do nothing.. It does not add HP, nor does it do anything else power related.. Just an FYI from a 15yr vortech man

I was hoping to relieve the surging that occurs at partial throttle. (The Maxflow Bypass Valve improves supercharger operation by opening to relieve unwanted pressure during deceleration. Flow is rated at 320 CFM at 8 PSIG and the valve is preset to open at 4-5 inches of vacuum.) When I give it too much gas from a stop it just goes to a condition of half throttle boost and I can't stop it until it's over. I guess I misread the hp thing but when I get to the point where I want to increase boost it couldn't hurt.

I think the most important thing is that you will hopefully no longer have any sudden surges and be able to control your car 100% now.

Exactly, Joey. From what I've read on other forums that is what others are doing. I hope it does the trick.

Subject: Re: Race Bypass Valve July 21st 2010, 7:44 pm

Got my Race Bypass Valve installed today. Halleluja, problem solved. The 3.73 gear pushed the rpm up 500 at 80, that took care of alot of it. The valve solved the problem completely through the power range. No more surging at any rpm now. I really like the back to stock feel on the skinny pedal. It makes a whole different whine now. You can here alot of air exhausting from the valve at 3000 rpm and up. I was cruising around in 3rd gear and it makes alot of air escaping sound that I can hear really well from the seat. I could esily autocross the car without a problem now.

Subject: Re: Race Bypass Valve July 21st 2010, 7:46 pm

Cool deal!!!

_________________
Crystal
2014 Dodge Durango SXT - stock for now
2007 Dodge Charger R/T - has some stuff done to it
You Tube Channel https://www.youtube.com/c/ChicagolandAreaModernMopars

Speed never killed anyone, suddenly becoming stationary, that's what gets you.

Subject: Re: Race Bypass Valve July 21st 2010, 7:56 pm

Oh yeah it looks awesome too. Here's a few pics. It's really big!

Race Bypass Valve Imgp2330

Subject: Re: Race Bypass Valve July 21st 2010, 9:11 pm

That looks awesome... good job tom...

Subject: Re: Race Bypass Valve July 21st 2010, 9:16 pm

irishrt5.7 wrote:: That looks awesome... good job tom...

X2.....

_________________
"Dont Talk About It, Be About It"
"Get In Where U Fit In"

Race Bypass Valve 1236920_10151644188979537_407418136_n

Subject: Re: Race Bypass Valve July 21st 2010, 9:32 pm

Thanks I like the look of it too. It sounds badd ass when I'm cruising. People that weren't even looking tiurned around to look when they heard me coming down the street. It's loud as hell!!

Subject: Re: Race Bypass Valve July 21st 2010, 11:02 pm

i wanna hear this thing... i love the sound of blow off valves...